BEST DIY EXTERIOR LED LIGHTS

DIY EverLights V3 LEDs

Installation Videos

Here are some videos we know will be helpful

to anyone installing Everlights.





Let's Get Started:

DIY EverLights: Measure & Create Your Material List

Create your material list is easy as 1,2,3. Spend 2 minutes watching this and jot down some notes or download material list on link below. Setting up Your system is just as easy Plug and Play all updated as new features roll out for Free. Wait till you see how this system can expand to other areas in the yard.

DIY EverLights: Simple LED lights to Install Yourself

Quick idea of how Everlights install on your home or business.

Gutters & Flashing Videos:

EverLights: Easiest LED Lighting to Install on Gutters

DIY Holiday lighting is one of the only that install on gutter. it fit right on the top row with o ring to keep water tight. Wire tucks right in top channel protecting it from the sun. when installing this way you don't have to use channel. Although if a light lines up  where a bracket or nail that holds gutter just remove bracket/nail 2 inches one way or the other.

EverLights: Easiest LED Lights to Install on Flashing

This is One of the best ways to install of our LEDs, as it is quick and protected under the elements. You need to check and make sure your flashing is like in the video. Mine was an older flashing and had no space under to put lights on. Channel always saves the day.

Channel Video Tutorials:

Installing EverLights Channel On A Peak

This is one way to install your channel on peaks. Simple planning knowing the distance to peak of how many lights is needed. Take that measurement divide by 9 to see how many lights on that run.

EverLights: Channel Install to Soffit: Mount Downward

This method is used most and is best for those that cannot install on roof flashing. I used this on my home and puts the lights facing down giving good light reflecting off home. Always make sure to order extra if you make any mistakes.

Soffit Back: Down Flush Mount Channel Installation

This is using same channel as under eve used in a different area depending on how you like to have your lights reflect. This application hides wires and being against wall will produce cool and bright light on the home. Another Idea is to use another zone allowing to put different color schemes in another area like around windows, along handrails, gazebo or patio cover.

Open Rafter Soffit Front: Flush Mount Channel

This is another option for mounting under fascia with easy access to exposed wires. Not my prefer way for this as I don't like to see wires and there are other options.

EverLights to Fascia & Eaves: Flush Mount Channel

This is a way to mount to different surfaces not only fascia but also to stucco homes that do not have wood fascia. Choosing your color of channel can be roof tile color, bird stop, or stucco color.

EverLights: Channel Install Under Gutters Flush Mount

Permanent LED below gutter flush mount is for those that don't have gutters or don't want to install on the gutter. It also can be used to ad another row of lights giving other effects on the lighting on your home.

EverLights: Channel Install to Decks Flat Edge Mount

This application may be best used for flat roof and or commercial building that have flat caps around building. Yes  permanent led Everlights can be use for commercial. Why they install once and any user controlling the app can do this. Last there is minimal Maintenance  and can be used all year for holiday, special events and sales.

LED Channel Installation Below Gutter Flush Mount

Permanent LED below gutter flush mount is for those that don't have gutters or don't want to install on the gutter. It also can be used to ad another row of lights giving other effects on the lighting on your home.

Network Bridge Videos:

EverLights Network Bridge & WiFi Setup

There is no other easier DIY LED control box out there. Just Plug and Play without connecting multiple components to make a system. This does automatic updates connected to a server at no extra charge. This is connected to your router inside your home. The NODE wireless receiver plug into power and connected to lights within the garage or any where you want lights. These NODE's have a half mile range and you can have up to 20 of them called zones. Remember all just plug and play with a mobile app on your phone or tablet with prebuilt sequences. Or create as many as you want and put it on the calendar and they turn on and off automatic.

*NOTE*

This is NOT needed for the Classic Warm White LED Light System.

EverLights App Tutorial

*NOTE*

This is NOT needed for the Classic Warm White LED Light System since they are designed to just turn Off & On Only. Making the Classic White the easiest to incoperate into commercial automation.

Mobile App Video Tutorials:

Part 1 Basic Overview and Settings

Part 2 Creating A Sequence

Part 3 Creating a Calendar Events

DIY Weekend Warrior?

Download the Google Sheets Materials Calculator!

It will make Job Bidding a lot quicker for you.

Best Experienced on Widescreens!

Quick links

Contact Us

Phone: 702.353.7003

[email protected]

All Orders Ship From:

Lindon UT

We accept