BEST DIY EXTERIOR LED LIGHTS

EverLights Spare Caps - 35 pcs

EverLights Spare Caps - 35 pcs

1 People are viewing this product now.
WAS $7.25 NOW $6.00
Qty
Color

PRODUCT DESCRIPTION

Did you drop a few caps while installing?  It’s okay, these caps are easy to replace.  Also if you have dark gutters you can upgrade to our colored caps to help the lights blend into your roofline even more!

And of course, all our caps offer top of the line UV resistance.

35 caps is enough for 25′ of lights (and a couple extras)

MATERIAL LIST ADDERS:

Select the items dropdown variation first before you tick the checkbox. To save time simply add any additional items needed from your material list below, then change the quantities in the side cart when it slides open.

DIY ESTIMATING TIPS

MEASURE ALL EVES AND GUTTERS

& always round up

HOW TO MEASURE PROJECT: VIDEO

Timelaps Install of channel & to gutters - Time: 00:38

The 3 Must Follow Rules For A Proper Install 

If all else fails, follow these rules and you will be OK. 

1) Never cut any wires with the lights powered. The lights are powered anytime they are plugged into a power source, whether the lights are on or not. Always install with the lights unplugged from all power sources. 
2) Connect like to like wires. The wire labeled “EverLights” only connects to other wires labeled “EverLights”. Same deal for the other two wires. 
3) Keep the direction of the lights constant. Every light has an input and output. They must always connect in to out. The back of every light is labeled and includes an arrow. Ensure all arrows are pointing in the same direction. 

Failure to follow these rules will result in an increased failure rate because of improper power flow. 



TERMINATING WIRE RUNS

Wherever you decide to terminate a run of lights it is very important to properly protect the exposed wires. There are multiple methods to coat the end of the wires, but generally electrical tape, silicone, or liquid electrical tape work best. The purpose of coating the wires is to prevent the positive and wires from coming in contact through water, touching against a piece of metal, or any other conductive material.


A short in the lights will cause improper function and potential damage to the lights in the system. To further protect against a potential short, snip the positive wire an inch shorter than the other wires before coating.

PRODUCT REVIEWS

No Review Found

Quick links

Contact Us

Phone: 702.353.7003

[email protected]

All Orders Ship From:

Lindon UT

We accept